INFLUENCE OF THE USE OF WASTE GENERATED BY THERMOELECTRIC POWER PLANT ON SUSTAINABLE ASPHALT MIXES
DOI:
https://doi.org/10.15628/holos.2023.16321Keywords:
Mineral coal ash; Dense asphalt mixes; French formulation methodology.Abstract
The main objective of this research is to evaluate the influence of using waste generated by a coal-burning thermoelectric power plant in asphalt mixes. The matrices called fly ash, bottom ash and a composition with 50 % of each type were analyzed, and compared to conventional crushed gneissic rock particles, all used as filling material (filler) at 6.0 % passing through the mesh opening 0.075 mm, in the granulometric curves of asphalt mixes. The matrices studied are technically viable for use in asphalt mixes, creating the potential for large-scale market use of bottom ash, especially in the southern region of the State of Santa Catarina. Thus, to benefit more directly from the proximity to the source producing these inputs, the South region can explore the use of power plant waste, given the easy access and shorter transport distances.
Downloads
References
Akinwumi, I.; Onyeiwu, M.; Epelle, P.; Ajayi, V. (2023). Soil Improvement Using Blends of Coal Ash and Plantain Peel Ash as Road Pavement Layer Materials. Resources, 12, 41.
Aquino, T. F.; Estevam S. T.; Corrêa G. R.; Marques C. R. M.; Melo A. R.; Marcelo R. R.; Pires M.; Hammerschmitt M.; Riella H. G. (2017). Síntese de zeólitas do tipo X a partir de cinzas volantes e de fundo de carvão mineral. V Congresso Brasileiro de Carvão Mineral.
Bamigboye, G. O.; Bassey, D. E.; Olukanni, D. O.; Ngene, B. U.; Adegoke, D.; Odetoyan, A. O.; Kareem, M. A.; Enabulele, D. O.; Nworgu, A. T. (2021). Waste materials in highway applications: An overview on generation and utilization implications on sustainability. Journal of Cleaner Production 283, 124581.
Barra, B. S. (2009). Avaliação da ação da água no módulo complexo e na fadiga de misturas asfálticas densas. Tese (Doutorado), Programa de Pós-Graduação em Engenharia Civil (PPGEC), Universidade Federal de Santa Catarina, Florianópolis. 327 p.
Barra, B. S. Momm, L. Brosseaud, Y. Hornych, P. (2010). Diretrizes para a formulação e avaliação do comportamento mecânico de misturas asfálticas. Revista Pavimentação, Ano V, Associação Brasileira de Pavimentação (ABPV), v. 17, p. 38-58.
Brunauer, S.; Emmett, P.H.; Taylor, E. (1938). Adsorption of gases in multimolecular layers. Journal of the American Chemical Society. 60, 309-319.
Carnin, R. L. P. Matosso Filho, N. P. Momm, L. (2005). Reaproveitamento do Resíduo Areia Verde de Fundição em Misturas Asfálticas. 12º Congresso de Fundição. 316-325. São Paulo, Brasil.
Clara, E. (2020). Avaliação de misturas asfálticas densas com a incorporação de cinza de carvão mineral. Dissertação de Mestrado. Joinville: Universidade Federal de Santa Catarina.
Cuan, Z.; Chen, Y.; Kumar, S. (2023). Design, multi-aspect analyses, and multi-objective optimization of a novel trigeneration system based on geothermal and municipal solid waste energies. Process Safety and Environmental Protection 177, 581–597.
Eing, M. A. (2018). Análise da incorporação de cinza volante e pesada em dosagens de misturas asfálticas densas. Trabalho de Conclusão de Curso, Universidade Federal de Santa Catarina. Joinville/SC.
Esther, L. A.; Pedro, L. G.; Irune, I. V.; Flintsch Gerardo, F. (2020). Comprehensive analysis of the environmental impact of electric arc furnace steel slag on asphalt mixes. Journal of Cleaner Production 275. 123121.
Gonçalves, J. P. (2000). Utilização do resíduo de corte de granito (RCG) como adição para produção de concretos. Universidade Federal do Rio Grande do Sul (UFRGS). 120 p. Porto Alegre, Brazil.
IEA. (2022). World Energy Outlook. International Energy Agency. Flagship report.
Kumar, P.; Shukla, S. (2022). Flexible pavement construction using different waste materials: a review. Mater. Today.: Proc. 65, 1697–1702.
Le, N. H., Razakamanantsoa A, Nguyen M-L, Phan VT, Dao P-L, Nguyen DH. (2018). Evaluation of physicochemical and hydromechanical properties of MSWI bottom ash for road construction. Journal of Waste Management. 80, 168-174.
Li J, Xiao F, Zhang L, Amirkhanian SN. (2019). Life cycle assessment and life cycle cost analysis of recycled solid waste materials in highway pavement: a review. Journal of Cleaner Production. 233, 1182-1206.
Majer, S., Budzinski, B., (2018). Utilization of recycled materials in road construction. Sofia. International Multidisciplinary Scientific GeoConference : SGEM 18 (4.2), 247e253.
Mallmann, J. E. C. (1996). Estabilização pozolânica de cinzas volantes e pesada com cal dolomítica hidratada e areia, curadas pelos processos de autoclavagem e câmara à temperatura constante.Dissertação, UFRGS, Porto Alegre, 164p.
Meurer, P. (2015). Caracterização de materiais rochosos do norte de Santa Catarina para fins de aplicação em obras de pavimentação. Trabalho de Conclusão de Curso, Universidade Federal de SantaCatarina. Joinville/SC. 92p.
Mohanty, M.; Biswal, D. R.; Mohapatra, S. S. (2023). A systematic review exploring the utilization of coal mining and processing wastes as secondary aggregate in sub-base and base layers of pavement – Review. Construction and Building Materials, 368. 130408.
Oliveira, M. L. S. Ward, C. R. French, D. Hower, J. C. Querol, X. Silva, L. F. O. (2012). Mineralogy and leaching characteristics of beneficiated coal products from Santa Catarina - Brazil. International Journal of Coal Geology, 94 (1), 314-325.
Omrani MA, Modarres A. (2018). Emulsified cold recycled mixes using cement kiln dust and coal waste ash-mechanical-environmental impacts. Journal of Cleaner Production. 199,101-111.
Pattanaik, M. L.; Choudhary, R.; Kumar, B.; Kumar, A. (2021). Mechanical properties of open graded friction course mixes with different contents of electric arc furnace steel slag as an alternative aggregate from steel industries. Road Mater. Pavem. Design 22 (2), 268–292.
Rhode, G. M.; Zwonok, O.; Chies, F.; Silva, (2006). N.I.W. Cinzas de carvão fóssil no Brasil – Aspectos técnicos e ambientais. vol.1 Porto Alegre: CIENTEC.
Sarbak, Z; Stanczyk, A. Kramer-Wachowiack, M. (2004). Characterization of surface properties of various fly ashes.Powder tecnology., v.145, p.82-87.
Siroma, R. S. (2018). Avaliação da deformação permanente em misturas asfálticas densas formuladas com areia descartada de fundição (ADF). Dissertação. 196 p.
Wang, D.; Tawka, M.; Indraratnab, B.; Heitora, A.; Rujikiatkamjorna, C. (2019). A mix of coal wash and fly ash as a pavement substructure material. Transportation Geotechnics, 21, 100265.
Woszuk A, Bandura L, Franus W. (2019). Fly ash as low cost and environmentally friendly filler and its effect on the properties of mix asphalt. Journal of Cleaner Production. 235, 493- 502.
Yue, Y.; Abdelsalam, M.; Khater, A.; Ghazy, M. (2022). A comparative life cycle assessment of asphalt mixes modified with a novel composite of diatomite powder and lignin fiber. Construction and Building Materials 323. 126608.
Ziari, H.; Zalnezhad, M.; Ziari, M. A.; Amiri, E. N. (2022). Substitution of the natural aggregate filler by coal waste powder (CWP) in microsurfacing surface treatment: Mix design and performance evaluation. Construction and Building Materials 354, 129132.
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Português (Brasil)
English
Español (España)
Français (France)
