Influência de tratamentos térmicos sobre varetas combustíveis de Zr-1.0Nb-1.0Sn-0.1Fe: Evolução microestrutural, propriedades mecânicas e comportamento sob desgaste por fretting
DOI:
https://doi.org/10.15628/holos.2024.15893Palavras-chave:
Fuel rods, Spacer grids, Heat treatments, Fretting wear, Zr-1.0Nb-1.0Sn-0.1Fe alloyResumo
Neste trabalho, estudou-se o comportamento de varetas combustíveis de Zr-1Nb-1Sn-0,1Fe submetendo-as a ensaios físicos visando reproduzir a ocorrência de fretting e reduzir a ocorrência de GTRF por meio de engenharia de superfície/transformação de fase. Para tanto, tratamentos térmicos foram realizados nas superfícies das varetas combustíveis em diferentes temperaturas para modificar a microestrutura (α-Zr a β-Zr) e melhorar as propriedades mecânicas. Os testes mecânicos confirmaram a melhora nas propriedades mecânicas e os testes MEV, EED e DRX confirmaram a modificação da microestrutura da liga. Os testes de fretting foram realizados em equipamentos projetados para induzir deslocamentos horizontais das varetas combustíveis em relação à grade espaçadora. Verificou-se, por microscopia confocal, que os mecanismos de desgaste por fretting observados nas varetas combustíveis incluem abrasão, adesão e deformação plástica, e que o aumento da temperatura de tratamento térmico diminui a perda de massa, indicando desgaste por fretting menos severo
Downloads
Referências
Ahmmed, K.F., Daymond, M.R., Gharghouri, M.A. (2016). Microstructural evaluation and crystallographic texture modification of heat-treated zirconium Excel pressure tube material. Journal of Alloys and Compounds, (687), 1021-1033. doi: 10.1016/j.jallcom.2016.05.072 DOI: https://doi.org/10.1016/j.jallcom.2016.05.072
Averin, S.A., Panchenko, V.L., Kozlov, A.V., Sinelnikov, L.P., Shishov, V.N., Nikulina, A.V., 2000. Evolution of dislocation and precipitate structure in Zr alloys under long-term irradiation. In: Zircon. Nucl. Ind. Twelfth Int. Symp, 105-121. doi: 10.1520/STP14297S DOI: https://doi.org/10.1520/STP14297S
Baêta, D.A., Costa, D.J.R., Cardoso, F.G., Medeiros, N., 2020. Evaluation of fretting wear occurrence on the surface of nuclear fuel rods of Zr–1Nb–1Sn-0.1Fe alloy: Effects of assembly misalignment and grid spring loading. Wear 460–461, 203422. DOI: https://doi.org/10.1016/j.wear.2020.203422
Baêta, D.A., Costa, D.J.R, Medeiros, N., 2021. Analysis of heat treatment effect on fretting fatigue occurrence in Zr-1Nb-1Sn-0.1Fe fuel rods. Prog. Nucl. Ener. 140, 103923. DOI: https://doi.org/10.1016/j.pnucene.2021.103923
Burr, P.A., Murphy, S.T., Lumley, S.C., Wenman, M R., Grimes, R.W., 2013. Hydrogen solubility in zirconium intermetallic second phase particles. J. Nucl. Mater. 443, 502–506. DOI: https://doi.org/10.1016/j.jnucmat.2013.07.060
Chen, L., Li, J., Zhang, Y., Zhang, L.C., Lu, W., Wang, L., Zhang, L., Zhang, D., 2015. Zr–Sn–Nb–Fe–Si–O alloy for fuel cladding candidate: Processing, microstructure, corrosion resistance and tensile behavior. Corrosion Sci. 100, 332–340. DOI: https://doi.org/10.1016/j.corsci.2015.08.005
Cho, K.H., Kim, T.H., Kim, S.S., 1998. Fretting wear characteristics of Zircaloy-4 tube. Wear 219, 3–7. DOI: https://doi.org/10.1016/S0043-1648(98)00164-1
Fazi, A., Sattari, M., Stiller, K., Andrén, H.O., Thuvander, M., 2023. Performance and evolution of cold spray Cr-coated optimized ZIRLO™ claddings under simulated loss-of-coolant accident conditions. J. Nucl. Mater. 576, 154268. DOI: https://doi.org/10.1016/j.jnucmat.2023.154268
Felipe, E. C. B., & Ladeira, A. C. Q. (2014). ESTUDO DA SEPARAÇÃO DO PAR ZIRCÔNIO E HÁFNIO POR TROCA IÔNICA. HOLOS, 3, 291–298. https://doi.org/10.15628/holos.2014.1769 DOI: https://doi.org/10.15628/holos.2014.1769
Francis, E.M., Harte, A., Frankel, P., Haigh, S.J., Jädernäs, D., Romero, J., Hallstadius, L., Preuss, M., 2014. Iron redistribution in a zirconium alloy after neutron and proton irradiation studied by energy-dispersive X-ray spectroscopy (EDX) using an aberration-corrected (scanning) transmission electron microscope. J. Nucl. Mater. 454, 387-397. DOI: https://doi.org/10.1016/j.jnucmat.2014.08.034
Fu, Y., Wei, J., Batchelor, A.W., 2000. Some considerations on the mitigation of fretting damage by the application of surface-modification Technologies. J. Mater. Proc. Tech. 99, 231–245. DOI: https://doi.org/10.1016/S0924-0136(99)00429-X
Guo, X., Lai, P., Tang, L., Lu, J., Wang, J., Zhang, L., 2018. Fretting wear of alloy 690 tube mated with different materials in high temperature water. Wear 400-401, 119–126. DOI: https://doi.org/10.1016/j.wear.2018.01.001
Harte, A., Griffiths, M., Preuss, M., 2018. The characterization of second phases in the Zr-Nb and Zr-Nb-Sn-Fe alloys: A critical review. J. Nucl. Mater. 505, 227-239. DOI: https://doi.org/10.1016/j.jnucmat.2018.03.030
Hoeppner, D.W., 2006. Fretting fatigue case studies of engineering components. Tribol. Int. 39, 1271–1276. Jha, S.K., Keskar, N., Vishnu Narayan, K.I., Mani Krishna, K V., Srivastava, D., Dey, G.K., Saibaba, N., 2016. Microstructural and textural evolution during hot deformation of dilute Zr-Sn alloy. J. Nucl. Mater. 482, 12-18. DOI: https://doi.org/10.1016/j.jnucmat.2016.09.028
Kim, H.G., Baek, J.H., Kim, S.D., Jeong, Y.H., 2008. Microstructure and corrosion characteristics of Zr-1.5Nb-0.4 Sn-0.2Fe-0.1Cr alloy with α β-annealing. J. Nucl. Mater. 372, 304–311. DOI: https://doi.org/10.1016/j.jnucmat.2007.03.259
Kim, K.T., 2009. The study on grid-to-rod fretting wear models for PWR fuel. Nucl. Eng. Des. 239, 2820–2824. DOI: https://doi.org/10.1016/j.nucengdes.2009.08.018
Kim, K.T., Suh, J.M., 2009. Impact of Nuclear Fuel Assembly Design on Grid-to-Rod Fretting Wear. J. Nucl. Sci.Tech. 46, 149-157. DOI: https://doi.org/10.3327/jnst.46.149
Kobylyansky, G.P., Novoselov, A.E., Ostrovsky, Z.E., Obukhov, A.V., Shishin, V.Y., Shishov, V.N., Nikulina, A.V., Peregud, M.M., Mahmood, S.T., White, D.W., Lin, Y.P., Dubecky, M.,2008. Irradiation-induced growth and microstructure of recrystallized, cold worked and quenched Zircaloy-2, NSF, and E635 alloys. J. ASTM Int. 5, 564-582. DOI: https://doi.org/10.1520/STP48156S
Kruger, R.M., Adamson, R.B., 1993. Precipitate behaviour in zirconium-based alloys in BWRs. J. Nucl. Mater. 205, 242-250. DOI: https://doi.org/10.1016/0022-3115(93)90086-E
Kumara, C., Wang, R., Lu, R.Y., Deck, C., Gazza, J., Qu, J., 2022. Grid-to-rod fretting wear study of SiC/SiC composite accident-tolerant fuel claddings using an autoclave fretting bench test. Wear 488-489, 204172. DOI: https://doi.org/10.1016/j.wear.2021.204172
Lee, Y.H., Kim, H.K., 2013. Fretting wear behavior of a nuclear fuel rod under a simulated primary coolant condition. Wear 301, 569–574. DOI: https://doi.org/10.1016/j.wear.2013.01.067
Leen, S., Hyde, T., Ratsimba, C., Williams, E., McColl, I., 2002. An investigation of the fatigue and fretting performance of a representative aero-engine spline coupling. J. Strain Anal. Eng. Des. 37, 565–83. Lin, Y.W., Cai, Z.B., Chen, Z.G., Qian, H., Tang, L.C., Xie, Y.C., Zhu, M.H., 2016. Influence of diameter–thickness ratio on alloy Zr-4 tube under low-energy impact fretting wear. Mater. Today Commun. 8, 79–90. DOI: https://doi.org/10.1016/j.mtcomm.2016.06.003
Li, Y., Liu, Y., Li, G., Dong, X., Wang, Y., Gu, Z., Zhang, Y., 2021. Iodine-induced stress corrosion cracking behavior of alloy ZIRLO with Zr coatings by electrodepositing with different pulse current densities. Corr. Sci. 193, 109890. DOI: https://doi.org/10.1016/j.corsci.2021.109890
Lorenzo-Martin, C., Ajayi, O.O., Hartman, K., Bhattacharya, S., Yacout, A., 2019. Effect of Al2O3 coating on fretting wear performance of Zr alloy. Wear 426-427, 219-227. DOI: https://doi.org/10.1016/j.wear.2018.12.024
Morghi, Y., Mesquita, A. Z., Puente Angulo, J. A., & Baliza Maia, A. R. (2018). SIMULAÇÃO DO ESCOAMENTO EM CONTRACORRENTE ÁGUA/AR EM REATORES NUCLEARES PWR UTILIZANDO CÓDIGO OPENFOAM. HOLOS, 6, 92–102. https://doi.org/10.15628/holos.2018.5643 DOI: https://doi.org/10.15628/holos.2018.5643
Niculina, A.V., Markelov, V.A., Peregud, M.M., Voevodin, V.N., Panchenko, V.L., Kobylyansky, G.P., 1996. Phase transition temperature in the Zr-1Nb-1Sn-0.4Fe alloy. J. Nucl. Mater. 238, 205. DOI: https://doi.org/10.1016/S0022-3115(96)00453-9
Northwood, D.O., Meng-Burany, X., Warr, B.D., 1991. Microstructure of Zr-2.5Nb alloy pressure tubing. In: Zircon. Nucl. Ind. 12th Symp, 156-176. DOI: https://doi.org/10.1520/STP25506S
Park, C., Kim, J., Sim, A., Sohn, H., Jang, H., Chun, E.J., 2019. Influence of diode laser heat treatment and wear conditions on the fretting wear behavior of a mold steel. Wear 434-435, 202961. DOI: https://doi.org/10.1016/j.wear.2019.202961
Pusilina, N.S., Kudiiarov, V.N., Lider, A.M., Teresov, A.D., 2015. Influence of surface structure on hydrogen interaction with Zr–1Nb alloy. J. Alloys Comp. 645, 476-479. DOI: https://doi.org/10.1016/j.jallcom.2014.12.078
Qiu, R., Luan, B., Chai, L., Zhou, Y., Chen, J., 2012. Review of second phase particles on zirconium alloys (II): Zr–Sn–Nb–Fe alloys. Chin. J. Nonf. Met. 6, 1606–1615.
Qu, J., Cooley, K.M., Shaw, A.H., Lu, R.Y., Blau, P., 2016. Assessment of wear coefficients of nuclear zirconium claddings without and with pre-oxidation. Wear 356–357, 17–22. DOI: https://doi.org/10.1016/j.wear.2016.02.020
Ramos, C., Saragovi, C., Granovsky, M.S., 2007. Some new experimental results on the Zr-Nb-Fe system. J. Nucl. Mater. 366, 198-205. DOI: https://doi.org/10.1016/j.jnucmat.2007.01.216
Reed, B., Wang, R., Lu, R.Y., Qu, J., 2021. Autoclave grid-to-rod fretting wear evaluation of a candidate cladding coating for accident-tolerant fuel. Wear 466-467, 203578. DOI: https://doi.org/10.1016/j.wear.2020.203578
Sabol, G.P., 2006. ZIRLO: An alloy development success. In: Proceedings of the 14th International Symposium on Zirconium in Nuclear Industry. ASTM STP 1467, 3–24. DOI: https://doi.org/10.1520/STP37500S
Sunde, S.L., Berto, F., Haugen, B., 2018. Predicting fretting fatigue in engineering design. Int. J. Fatigue 117, 314-326. DOI: https://doi.org/10.1016/j.ijfatigue.2018.08.028
Tang, L., Ding, S., Qian, H., Xie, Y., Huo, Y, 2014. Fretting fatigue tests and crack initiation analysis on zircaloy tube specimens. International Journal of Fatigue 63, 154-161. DOI: https://doi.org/10.1016/j.ijfatigue.2014.01.020
Toffolon-Masclet, C., Brachet, J.C., Servant, C., Joubert, J.M., Barberis, P., Dupin, N., Zeller, P., Limback, M., Kammenzind, B., Dean, S.W., 2008. Contribution of termo-dynamic calculations to metallurgical studies of multi-component zirconium based alloys. J. ASTM Int. 5, 101-122. DOI: https://doi.org/10.1520/JAI101122
Toffolon-Masclet, C., Guilbert, T., Brachet, J.C., 2008. Study of secondary intermetallic phase precipitation/dissolution in Zr alloys by high temperature-high sensitivity calorimetry. J. Nucl. Mater. 372, 367-378. DOI: https://doi.org/10.1016/j.jnucmat.2007.04.042
Woo, O.T., Griffiths, M., 2009. The role of Fe on the solubility of Nb in a-Zr. J. Nucl. Mater. 384, 77-80. DOI: https://doi.org/10.1016/j.jnucmat.2008.10.004
Yang, Z.N., Liu, F.C., Zhang, F.C., Yan, Z.G., Xiao, Y.Y., 2012. Microstructural Evolution and mechanical properties in Zr705 during the rolling process. Mater. Sci. Eng. A. 544, 54–58. DOI: https://doi.org/10.1016/j.msea.2012.03.014
Zhang, J., Zhao, Y., Pantea, C., Qian, J., Daemen, L.L., Rigg, P.A., Hixson, R.S., Greeff, C.W., Gray III, G.T., Yang, Y., Wang, L., Wang, Y., Uchida, T., 2005. Experimental constraints on the phase diagram of elemental zirconium. J. Phys. Chem. Sol. 66, 1213-1219. DOI: https://doi.org/10.1016/j.jpcs.2005.03.004
Zheng, J.F., Luo, J., Mo, J.L., Peng, J.F., Jin, X.S., Zhu, M.H., 2010. Fretting wear behaviors of a railway axle steel. Tribol. Int. 43, 906–11. DOI: https://doi.org/10.1016/j.triboint.2009.12.031
Downloads
Publicado
Como Citar
Edição
Seção
Licença
Este trabalho está licenciado sob uma licença Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Português (Brasil)
English
Español (España)
Français (France)
