AVALIAÇÃO DO TAMANHO DE BOLHA PRODUZIDO POR UM SPARGER COMINCO

Autores

  • Rafael Teixeira Rodrigues Universidade Federal do Rio Grande do Sul

DOI:

https://doi.org/10.15628/holos.2014.1760

Resumo

O diâmetro de bolha constitui um dos principais parâmetros para avaliação da eficiência de dispersão ar-polpa no processo de flotação. Os espumantes desempenham um papel fundamental no controle do tamanho de bolha (geração de bolhas mais finas), na estabilidade e mobilidade da espuma, assim como na melhora da adesão partícula-bolha, refletindo principalmente na cinética de flotação e no desempenho metalúrgico (recuperação e teor). Este trabalho apresenta estudos realizados para avaliar a distribuição de tamanho de bolhas geradas por um sparger COMINCO, através da visualização das bolhas em uma câmara externa, combinando técnicas de captura, processamento e análise de imagens digitais. Foram testados quatro tipos de espumantes amplamente utilizados na flotação de minérios: óleo de pinho, DF250, Flotanol M (MIBC) e Montanol 100 (2-Etil-1-hexanol). A influência de variáveis operacionais, como a concentração de espumante e a razão ar/líquido (RA/W) foram estudadas em detalhe. O diâmetro médio de bolha foi fortemente influenciado pela concentração de espumante até a concentração crítica de coalescência (CCC), assim como pela RA/W. Para concentrações de espumante acima da CCC, o diâmetro médio de bolha foi de aproximadamente 0,4 – 0,6 mm, sugerindo que este seja o menor tamanho médio de bolha produzido por este sparger para uma pressão de operação de 4,2 kgf/cm2.

Downloads

Não há dados estatísticos.

Métricas

Carregando Métricas ...

Referências

ALDRICH, C., FENG, D. The effect of frothers on bubble size distributions in flotation pulp phases and surface froths, Minerals Engineering, v. 13, n. 10-11, p. 1049-1057, 2000.

CHO, Y.S., LASKOWSKI, J.S. Bubble coalescence and its effect on dynamic foam stability, Can. J. Chem. Eng., v. 80, n.2, p. 299-305, 2002a.

CHO, Y.S., LASKOWSKI, J.S. Effect of flotation frothers on bubble size and foam stability, International Journal of Mineral Processing, v. 64, p. 69-80, 2002b.

FINCH, J., XIAO, J., HARDIE, C., GOMEZ, C.O. Gas dispersion properties: Bubble surface area flux and gas holdup, Minerals Engineering, v. 13, n. 4, p. 365-372, 2000.

GRAU, R.A., HEISKANEN, K. Gas dispersion measurements in a flotation cell, Minerals Engineering, v. 16, p. 1081-1089, 2003.

HERNANDEZ-AGUILAR, J.R., COLEMAN, R.G., GOMEZ, C.O., FINCH, J.A. A comparison between capillary and imaging techniques for sizing bubbles in flotation systems, Minerals Engineering, v. 17, n. 1, p. 53-61, 2004.

LASKOWSKI, J.S., TLHONE, T., WILLIAMS, P., DING, K. Fundamental properties of the polyoxypropylene alkyl ether flotation frothers. International Journal of Mineral Processing, v. 72, n. 1-4, p. 289-299, 2003.

LEIVA, J., VINNETT, L., CONTRERAS, F., YIANATOS, J. Estimation of the actual bubble surface area flux in flotation, Minerals Engineering, v. 23, p. 888–894, 2010.

NESSET, J.E., HERNANDEZ-AGUILAR, J.R., ACUNA, C., GOMEZ, C.O., FINCH, J.A., Some gas dispersion characteristics of mechanical flotation machines, Minerals Engineering, v. 19, p. 807–815, 2006.

OLIVEIRA, C., SEGER, M.A., RODRIGUES, R,T. Desenvolvimento de um equipamento para avaliação da dispersão de bolhas em células de flotação. Anais do XXIV Encontro Nacional de Tratamento de Minérios e Metalurgia Extrativa, p. 115-124, Salvador, Brasil, 2011.

RANDALL, E.W., GOODALL, C.M., FAIRLAMB, P.M., DOLD, P.L., O´CONNOR, C.T. A method for measuring the sizes of bubbles in two-and three-phase systems, J. Phys. E: Sci. Instrum., v. 22, p. 827-833, 1989.

RODRIGUES, R.T., RUBIO, J., New basis for measuring the size distribution of bubbles, Minerals Engineering, v. 16, p. 757–765, 2003.

RODRIGUES, R.T., Desenvolvimento da Técnica LTM-BSizer para a Caracterização de Bolhas e Avaliação de Parâmetros no Processo de Flotação, Tese de Doutorado, Programa de Pós-Graduação em Engenharia de Minas, Metalúrgica e de Materiais – PPGEM/UFRGS, 114 p., 2004

SWEET, C., VAN HOOGSTRATEN, J., HARRIS, M., LASKOWSKI, J.S. The effect of frothers on bubble size and frothability of aqueous solutions. In: Finch, J.A., Rao, S.R., Holubec, I. (Eds.), Processing of Complex Ores – Proc. 2nd UBC-Mc Gill Int. Symp. Metallurgical Society of CIM, Montreal, p. 235-245, 1997.

UNNO, H., INOUE, I. Size reduction of bubbles by orifice mixer, Chemical Engineering Science, v. 35, p. 1571-1579, 1979.

VARLEY, J. Submerged gas-liquid jets: bubble size prediction, Chemical Engineering Science, v. 50, n. 5, p. 901-905, 1995.

YIANATOS, J., CONTRERAS F., 2009. On the carrying capacity limitations in large flotation cells. In: 48th Annual Conference of Metallurgists, COM 2009, Paper 2076, Sudbury, Canada, August 23–27.

Downloads

Publicado

03/07/2014

Como Citar

Rodrigues, R. T. (2014). AVALIAÇÃO DO TAMANHO DE BOLHA PRODUZIDO POR UM SPARGER COMINCO. HOLOS, 3, 193–202. https://doi.org/10.15628/holos.2014.1760

Edição

Seção

ARTIGOS

Artigos mais lidos pelo mesmo(s) autor(es)